Repair
Edge MAXX
7-60
CAUTION
Make sure all tools used
are clean. Dirt or debris
contaminating the inside of
the air cylinder can damage
or ruin it.
Be careful not to bend the
rodless air cylinder outer
band back too far. If the
band becomes creased or
deformed, it must
be replaced.
NOTE:
The following steps
are shown with the air cylinder
removed from the machine for
clarity.
Hold back the outer band (Figure 7-80, A).
Be careful not to pull it back too far.
Use a clean Allen wrench or similar tool
to gently press against the inner band
(Figure 7-80, B). There should be very
little flexing.
9.
10.
CAUTION
Be careful not to completely
remove the inner band
retaining screw.
Loosen the inner band retaining screw
(Figure 7-81, A). Be careful not to remove
it completely.
Have one worker hold back the outer band
(Figure 7-81, B) while the other uses the
end of a clean Allen wrench or similar tool
to press the end of the inner band firmly
against the air cylinder end cap (C) and
tightens the inner band retaining screw.
Wipe the work area with a clean lint-free
cloth to make sure no dirt or debris in left
in the cylinder.
Reposition the outer band and secure with
the retaining screw removed in Step 8.
Replace the protective cap removed in
Step 7.
Repeat Steps 6 to 15 for the other end of
the cylinder. Move the discharge conveyor
ribbons aside as necessary for access.
11.
12.
13.
14.
15.
16.
Figure 7-80: When gently pressed, there should be
very little give in the inner band.
A
B
Figure 7-81: Have one worker hold back the outer
band while the other tightens the inner
band.
A
B
C
TOC
INDEX
Содержание Edge MAXX
