MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
8.4.12 CF_IMAGEADJ COMMAND
COMMAND “CF_IMAGEADJ_%1”[CR]
%1
“RST”------Reset Image adjustment
“STR1”----Store current image adjustment to Custom
Details
Reset and store for image adjustment. (When it is in usual Power ON state,
this is valid.)
“STR1” execute image adjustment on OSD menu.
The value set by this Command will be stored. Therefore, when projector
POWER OFF, the value will return to the original setting.)
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.4.13 CF_APCTRL COMMAND
COMMAND
“CF_APCTRL_%1”[CR]
%1
“
L
1”------ Digital keystone with Level 1
“
L
2”------ Digital keystone with Level 2
“OFF”---- OFF Digital keystone
Details
Set digital keystone(Only valid when it is in the usual Power On state.)
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.4.14 CF_COLMNSAV COMMAND
COMMAND “CF_COLMNSAV_%1”[CR]
%1
“000”-”009”---- Specify store area
Details
Store current color management setting status to the area by %1
specification.
(Only valid when it is in the usual Power On state.)
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.4.15 CF_COLMNLD COMMAND
COMMAND
“CF_COLMNLD_%1”[CR]
%1
“000”-”009”---- Specify store area
Details
Call color management setting status from an area by %1 specification
(Only valid when it is in the usual Power On state.)
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
Page 19 / 53