MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
9.11.10 CR_KEYDIS COMMAND
COMMAND “CR_KEYDIS”[CR]
Details
Get RC/KEY status
Acceptable
“000_%1”[CR]
%1
“N/A”
=
Both RC & KEY are available.
“RC”
=
RC is locked
“KEY”
=
KEY is locked
Response
Unacceptable “
?
”[CR]
9.12 Other Status Read COMMAND
9.12.1 CR_SIGNAL COMMAND
COMMAND “CR_SOGNAL”[CR]
Details
Get information if there is signal or not
Acceptable
“000_%1”[CR]
%1
“ON”
=
There is signal
“OFF”
=
No signal
Response
Unacceptable
?
”[CR]
9.12.2 CR_VMUTE COMMAND
COMMAND
“CR_VMUTE [CR]
Details
Get No Show setting status
Acceptable
“000_%1”[CR]
%1
“ON”----- Set No Show
“OFF”--- Cancel No Show
Response
Unacceptable “
?
”[CR]
9.12.3 CR_FREEZE COMMAND
COMMAND “CR_FREEZE”[CR]
Details
Get Freeze setting status
Acceptable
“000_%1”[CR]
%1
“ON”----- Freeze is set
“OFF”--- Freeze is canceled
Response
Unacceptable “
?
”[CR]
Page 51 / 53