MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
8.4.9 CF_NZRED
COMMAND
COMMAND “CF_NZRED_%1”[CR]
%1
“ON”------ Select Noise Reduction
“OFF”---- Cancel Noise Reduction
Details
Set/Cancel Noise Reduction.(When it is in usual Power ON state, this is
valid.) The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For Stand-by mode, this value stays.) Only valid when it is in the
usual Power On state.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.4.10 CF_PROGV COMMAND
COMMAND
“CF_PROGV_%1”[CR]
%1
“L1”------ Select Progressive Mode L1
“L2”------ Select Progressive Mode L2
“OFF”---- Cancel Progressive
Details
Set/cancel for progressive. (When it is in usual Power ON state, this is valid.)
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
setting. (For Stand-by mode, this value stays.) Only valid when it is in the
usual Power On state.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.4.11 CF_IMAGE COMMAND
COMMAND “CF_IMAGE_%1”[CR]
When
Input is
Computer
Series
“STAND”
----- Standard
“REAL”
------
High contrast
“CUSTOM1” -- Custom(The value which is adjusted and
saved by a user.)
%1
When Input
is
Video Series
“STAND”
----- Standard
“CINEMA” ---- Cinema
“CUSTOM1” -- Custom(The value which is adjusted and
saved by a user.)
Details
Select an Image Mode(When it is in usual Power ON state, this is valid.)
Parameter “
CUSTOM
1” is the same as selecting custom on OSD menu.
The value set by this Command is stored in EEEPROM. When ALL OFF
the projector, the value will return to the original setting.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
Page 18 / 53