MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
8.10.7 CF_LANG COMMAND
COMMAND “CF_LANG_%1”[CR]
%1
“ENG”---- Select English
“DEU”---- Select German
“FRA”---- Select French
“ITA”---- Select Italy
“ESP”---- Select Spanish
“POR”---- Select Portuguese
“NED”---- Select Dutch
“SVE”---- Select Swedish
“JPN”---- Select Japanese
“CHI”---- Select Chinese
“KOR”---- Select Korean
“RUS”---- Select Russian
Details
Set OSD language. (Only valid when it is in the usual Power On state.)
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.10.8 CF_ON-STA COMMAND
COMMAND “CF_ON-STA_%1”[CR]
%1
“ON”------ Select Power On Start
“OFF”---- Cancel Power On Start
Details
Set/Cancel Power ON Start. (Only valid when it is in the usual Power On
state.)
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.10.9 CF_P-MANE COMMAND
COMMAND “CF_P-MANE_%1”[CR]
%1
“OFF”------------ Set Power management to
OFF
“READY”-------- Set Power management to Ready
“SHUTDOWN”-- Set Power management to Shut Down
Details
Set/Cancel Power management.(Only valid when it is in the usual Power On
state.)
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
Page 34 / 53