MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
8.7.3 CF_TRUE
COMMAND
COMMAND “CF_TRUE_%1”[CR]
%1
“ON”------ Select True
“OFF”---- Cancel True
Details
Set/cancel True
Only valid when it is in the usual Power On state and input is computer.
Acceptable
“000”[CR]
Response
Unacceptable “101”[CR] ---- When Input is Video Series
8.7.4 CF_DZCENT
COMMAND
COMMAND
“CF_DZCNENT_%1”[CR]
%1
“CENT”----- Cancel Digital Zoom(CENT : “CENTER”)
Details
Cancel Digital Zoom
Only valid when it is in the usual Power On state and Input is computer.
Acceptable
“000”[CR]
Response
Unacceptable “101”[CR] ---- When Input is Video Series
8.7.5 CF_KEYSTONE
COMMAND
COMMAND
“CF_KEYSTONE_%1”[CR]
%1
“UP”-------- Make the screen image length at the top edge shorter with a
small range.
“FUP” ----- Make the screen image length at the top edge shorter with a large
range.
“DN” ------ Make the screen image length at the bottom edge shorter with a
small range.
“F
DN
” ----- Make the screen image length at the bottom edge shorter with a
large range.
“LEFT”---- Make the screen image length at the left edge shorter with a
small range.
“FLEFT”---- Make the screen image length at the left shorter with a large
range.
“RIGHT”-- Make the screen image length at the right edge shorter with a
small range.
“FRGT”---- Make the screen image length at the right edge shorter with a
large range.
“RST”------ Keystone off
Details
Change Keystone range.(Only valid when it is in the usual Power On state.)
When the range is over the maximum, a projector accepts the Command, but
it does not execute.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
Page 28 / 53