MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
8.6.5 CF_INPUT3
COMMAND
COMMAND “CF_INPUT3_%1”[CR]
%1
“VIDEO”-------- Select Composite Video Input
“S-VIDEO”---- Select S-Video input
“YPBPR”-------- Select Y/Pb/Pr
Details
Select Input-3 and specified source by %1.
(Only valid when it is in the usual Power On state.)
Acceptable
“000”[CR]
Response
Unacceptable “%%%”[CR]
8.6.6 CF_INPUT4
COMMAND
COMMAND “CF_INPUT4_%1”[CR]
%1
“NETWORK”---- Select DVI input for a computer
Details
Select Input-4 and specified source by %1.
(Only valid when it is in the usual Power On state.)
Note)When Network Manager is not installed, the command is invalid and
response is Error Code, “103”.
Acceptable
“000”[CR]
Response
Unacceptable “%%%”[CR]
8.6.7 CF_SYSTEM
COMMAND
COMMAND
“CF_SYSTEM_%1”[CR]
Input is
PC Series
“MODE1”------ Select Mode 1
“MODE2”------ Select Mode 2
“MODE3”------ Select Mode 3
“MODE4”------ Select Mode 4
“MODE5”------ Select Mode 5
%1
Input is
Video Series
“AUTO”-------- Select system “Auto”
“NTSC”-------- select NTSC
“NTSC443”-- Select NTSC4.43
“PAL”---------- Select PAL
“SECAM”------ Select SECAM
“PAL-
M
”------ Select PAL-M
“PAL-N”------ Select PAL-N
“1080I”------ Select 1080i
“1035I”------ Select 1035i
“720P”-------- Select 720p
“575P”-------- Select 575p
“480P”-------- Select 480p
“575I”-------- Select 575i
“480I”-------- Select 480i
Details
Select current selected Input system.
(Only valid when it is in the usual Power On state.)
When Input does not meet the requirement for specified %1, the response
will be “101” and the command does not execute.
Note 1) “NTSC” / “NTSC4.43” / “PAL” / “SECAM” / “PAL-M” / “PAL-N” is
available only when Input is VIDEO or S-VIDEO.
Note 2) “1080I” / “1035I” / “720p” / “575P” / “480P” / “575I” / “480I” is
Page 26 / 53