MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
9.8.8 CR_HPOS
COMMAND
COMMAND “CR_HPOS”[CR]
Details
Get H Position setting status
Acceptable
“000_%1”[CR]
%1
“-64”-”064”
Response
Unacceptable “
?
”[CR]
9.9 STATUS READ COMMAND FOR LAMP
9.9.1 CR_LAMPREPL
COMMAND
COMMAND
“CR_LAMPREPL”[CR]
Details
Get lamp replacement time information
Acceptable
“000_%1”[CR]
%1
“1Y”-- over the lamp replacement time
“1N”-- haven not reached the lamp replacement time
Response
Unacceptable “
?
”[CR]
9.9.2 CR_LAMPMODE
COMMAND
COMMAND
“CR_LAMPMODE”[CR]
Details
Get lamp mode setting status
Acceptable
“000_%1”[CR]
%1
“NORMAL”-- lamp mode is normal
“ECO”-------- lamp mode is silent
“AUTO”------ lamp mode is auto
Response
Unacceptable “
?
”[CR]
9.9.3 CR_PROJH
COMMAND
COMMAND
“CR_PROJH”[CR]
Details
Get total projector running time.(hours:(h))
Acceptable
“000_%1”[CR]
%1
“0000000”-”9999999”
Response
Unacceptable
?
”[CR]
Page 47 / 53