MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
9.7.3 CR_SRCINP1COMMAND
COMMAND “CR_SRCINP1”[CR]
Details
Get INPUT 1 Source.
Acceptable
“000_%1”[CR]
Required
Data
“DIGITAL”-- DVI mode status
“ANALOG”---- Analog RGBmode status
“SCART”------ Scart mode status
“HDCP”-------- HDCP mode status
“OUT”---------- Monitor OUT mode status
Response
Unacceptable “
?
”[CR]
9.7.4 CR_SRCINP2
COMMAND
COMMAND “CR_SRCINP2”[CR]
Details
Get INPUT 2 Source
Acceptable
“000_%1”[CR]
%1
“VIDEO”------ Video mode status
“YPBPR”------ Y/Pb/Pr mode status
“ANALOG”---- Analog RGBmode status
Response
Unacceptable “
?
”[CR]
9.7.5 CR_SRCINP3
COMMAND
COMMAND “CR_SRCINP33”[CR]
Details
Get INPUT 3 source.
Acceptable
“000_%1”[CR]
%1
“VIDEO”------ Video mode status
“S-VIDEO”-- S-Video mode status
“YPBPR”------ Y/Pb/Pr mode status
Response
Unacceptable “
?
”[CR]
9.7.6 CR_SRCINP4
COMMAND
COMMAND “CR_SRCINP4”[CR]
Details
Get INPUT 4 Source
Acceptable
“000_%1”[CR]
%1
“NOCARD”---- NO Network option
“NETWORK”-- Network Viewer mode status
Response
Unacceptable “
?
”[CR]
Page 44 / 53