MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
9.4.16 CR_TURBO COMMAND
COMMAND “CR_TURBO”[CR]
Details
Get Bright SW setting status
Acceptable
“000_%1”[CR]
%1
“ON”---- Bright SW is ON
“OFF”-- Bright SW is OFF
Response
Unacceptable “
?
”[CR]
9.5 STATUS READ COMMAND FOR PC
9.5.1 CR_FSYNC
COMMAND
COMMAND “CR_FSYNC”[CR]
Details
Get Fine Sync value
Acceptable
“000_%1”[CR]
%1
“0000”-”0031”
Response
Unacceptable
“Error Code”[CR] ------ Invalid
“
?
”[CR] ---------------- When receives unclear Command
9.5.2 CR_TDOTS
COMMAND
COMMAND “CR_TDOTS”[CR]
Details
Get Total Dots value
Acceptable
“000_%1”[CR]
%1
“nnnn”-”9999”
(nnnn = Display Dots + Horizontal Position)
Response
Unacceptable
“Error Code”[CR] --- Invalid
“
?
”[CR] ------------- When receives unclear Command
9.5.3 CR_CLAMP
COMMAND
COMMAND “CR_CLAMP”[CR]
Details
Get Clamp value
Acceptable
“000_%1”[CR]
%1
“0000”-”0127”
Response
Unacceptable
“Error Code”[CR] --- Invalid
“
?
”[CR] ------------- When receives unclear Command
Page 40 / 53