MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
6.10 Network Viewer Series Status Read Command Table
Status Read Command
Item
CR_NETFUNC [CR]
Get COMMAND about Network Manager
7. Error Code Table
Error Code
Content
?
-When receives data that cannot be decoded
-Parameter determination error(digit number
error, and incorrect letter included)
000
Normal Reception (not error)
101
The function is not available in the selected mode.
102
Selected the value is out of range (Selected value
will not be reflected)
103
Command mismatched to the Hardware
(Command for unpopulated option function)
8. Functional Execution Command
8.1 Format
1. The following format’s Commands issued from a PC
Pattern1: ”CF_ COMMAND ” [CR]
Pattern2: ”CF_ COMMAND_”%1 [CR]
CF_:Header
COMMAND:Letters
%1:Parameter(Letters)
_:Space(to separate COMMAND and parameter)by parameter
2. When a projector decoded a received data and ready to receive the next
Command, it will return acknowledgment.
“000”
[
CR
]
:(0x06,0x0D)When received Function Execute Command
“nnn”
[
CR
]
:”000”Unable to execute any value except for “000” value for
anyspecific reason.
See the Error Code for its contents
3. When received an undecodable data
Return “
?
”
[
CR
]
8.2 Transfer Example
When setting projector total Command to 1344 by expand Command.
PC PJ :”CF_TDOTS_1344” [CR]
PC PJ :”000”[CR] ---------------- Reception OK
Page 14 / 53