background image

Thank you for purchasing this Panasonic product.

 

This manual is common to all the models regardless of suffixes of the Model No.

 

z

for USA, Canada, Korea

LB: Black model   

LW: White model

 

z

for India

LBD: Black model

 

z

for Taiwan

LB: Black model

 

z

for other countries or regions with power cord for 100 V - 120 V

LBX: Black model

 

z

for other countries or regions with power cord for 200 V - 240 V

LBEJ/LBE: Black model 

LWEJ/LWE: White model

 

Before operating this product, please read the instructions carefully and save this manual 

for future use.

 

Before using this product, be sure to read “Read this first!” (

x

 pages 5 to 16).

DPQP1432ZA/X1

LCD Projector  

Commercial Use

Operating Instructions

Functional Manual

ENGLISH

Model No. 

PT-MZ20K

 

PT-MZ17K

 

PT-MZ14K

 

PT-MZ11K

The projection lens is sold separately.

Summary of Contents for PT-MZ20K
























































































































































































































































































Reviews: