Canon imageRUNNER ADVANCE 6055 Series, Руководство по обслуживанию

Страница: 973 / 1406

8
8
8-191
8-191
Service Mode > COPIER > COUNTER > PRDC-1
Service Mode > COPIER > COUNTER > PRDC-1
■
PRDC-1
COPIER > COUNTER > PRDC-1
PRM-WIRE Primary Charging Wire parts counter
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
Supplement/memo This is commonly used as operator maintenance parts counter.
PRM-GRID Prmry Charge Ass'y Grid Wire parts cntr
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
PO-WIRE Pre-transfer Charging Wire parts cntr
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
PRM-CLN Primary Charge Wire Clean Pad prts cntr
Lv.1 Details Primary Charging Wire Cleaning Pad 1, 2
1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
COPIER > COUNTER > PRDC-1
PO-CLN Pre-trn Charge Wire Clean Pad prts cntr
Lv.1 Details Pre-transfer Charging Wire Cleaning Pad 1, 2
1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
PO-WI-U Pre-transfer Charge Wire Unit prts cntr
Lv.1 Details 1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
FIX-TH1 Fixing Main Thermistor parts counter
Lv.1 Details Handle the Fixing Main Thermistor with the Fixing Shutter Thermistor
as 1 part.
1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0
FIX-TH2 Fixing Sub Thermistor parts counter
Lv.1 Details Fixing Sub Thermistor 1, Fixing Shutter Thermistor
Handle the Fixing Shutter Thermistor with the Fixing Main Thermistor
as 1 part.
1st line: Total counter value from the previous replacement
2nd line: Estimated life
Use case When checking the consumption level of parts/replacing the parts
Adj/set/operate method To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and
then press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Default value 0