Canon imageRUNNER ADVANCE 6055 Series, Руководство по обслуживанию

Страница: 709 / 1406

7
7
7-24
7-24
Error Code > Error Code > Error Code Details > E500 to E5F6
Error Code > Error Code > Error Code Details > E500 to E5F6
■
E500 to E5F6
E
Code
Detail
Code
Location Item Description
E500 -0000 -05 Title Communication error (Finisher-E1)
Remedy 1. The Finisher Controller PCB is faulty.
2. The host machine DC Controller PCB is faulty.
Description The communication with the host machine is interrupted.
E503 -0002 -05 Title Communication error (Finisher-E1)
Remedy 1. The wiring between the Finisher Controller PCB and
Saddle Controller PCB is faulty.
2. The Finisher Controller PCB is faulty.
3. The Saddle Stitcher Controller PCB is faulty.
Description The communication with the Saddle Stitcher is interrupted.
E503 -0003 -05 Title Communication error (Finisher-E1/External 2 Hole Puncher)
Remedy 1. The wiring between the Finisher Controller PCB and host
machine DC Controller PCB is faulty.
2. The Punch Controller PCB is faulty.
3. The Finisher Controller PCB is faulty.
4. The host machine DC Controller PCB is faulty.
Description The communication with the Puncher unit is interrupted.
E503 -0004 -05 Title A. Communication error (Finisher-E1)
B. Communication error with Insertion Unit (Document
Insertion Unit-L1)
C. Communication error with Insertion Unit (Document
Insertion/Folding Unit-H1)
Remedy A-1. The wiring between the Finisher Controller PCB and host
machine Controller PCB is faulty.
A-2. The Finisher Controller PCB is faulty.
A-3. The host machine Controller PCB is faulty.
B-1. Inserter Controller PCB is faulty.
B-2. Disconnection of communication cable
B-3. Connector on the Inserter Controller PCB is
disconnected.
C-1. Folder Controller PCB is faulty.
C-2. Disconnection of communication cable
C-3. Connector on the DC Controller PCB is disconnected.
Description A. The communication with the Inserter or the Paper Folding
Unit is interrupted.
B. Failed communication for 3 consecutive times.
C. Failed communication for 3 consecutive times.
E505 -0001 -05 Title Finisher back-up RAM (EEPROM) error (Finisher-D1/E1)
Remedy The Finisher Controller PCB is faulty.
Description The checksum for the EEPROM data has an error. (The value
written in EEPROM and the value extracted from EEPROM
doesn't conform.)
E
Code
Detail
Code
Location Item Description
E505 -0002 -05 Title EEPROM error (External 2 Hole Puncher)
Remedy The Punch Controller PCB is faulty.
Description The checksum for the EEPROM data has an error.
E505 -0003 -05 Title A. EEPROM error with the Insertion Unit (failed data reading/
writing) (Document Insertion Unit-L1)
B. EEPROM error with the Insertion Unit (failed data reading/
writing) (Document Insertion/Folding Unit-H1)
Remedy A. The Insertion Unit Controller PCB is faulty.
B. Folder Controller PCB is faulty.
Description A. The checksum for the EEPROM data has an error.
B. Data failed to be read properly.
E514 -8001 -05 Title Rear end assist home position error (Finisher-E1)
Remedy 1. The Rear End Assist Home Position Sensor (PI109) is
faulty.
2. The wiring between the Finisher Controller PCB and Rear
End Assist Motor is faulty.
3. The end assist mechanism is faulty.
4. The Rear End Assist Motor (M109) is faulty.
5. The Finisher Controller PCB is faulty.
Description The stapler does not leave the rear end assist home position
when the Rear Eend Assist Motor has been driven for 3
seconds.
E514 -8002 -05 Title Rear end assist home position error (Finisher-E1)
Remedy 1. The Rear End Assist Home Pposition Sensor (PI109) is
faulty.
2. The wiring between the Finisher Controller PCB and Rear
End Assist Motor is faulty.
3. The end assist mechanism is faulty.
4. The Rear End Assist Motor (M109) is faulty.
5. The Finisher Controller PCB is faulty.
Description The stapler does not return to the rear end assist home
position when the Rear End Assist Motor has been driven for
3 seconds.
E518 -8001 -05 Title Error in Folding Feed Motor lock (Document Insertion/Folding
Unit-H1)
Remedy 1. Connector of the Folding Feed Motor (M5) is disconnected.
2. Folding Feed Motor (M5) is faulty.
Description The Folding Feed Motor (M5) lock signal has been detected
for more than the specified time.