Canon imageRUNNER ADVANCE 6055 Series, Руководство по обслуживанию

Страница: 85 / 1406

2
2
2-31
2-31
Technology > Main Controller > Controls > HDD Encryption/ Mirroring Kit (optional)
Technology > Main Controller > Controls > HDD Encryption/ Mirroring Kit (optional)
The figure below shows the final screen in initializing the encryption board.
The message as shown in the figure below is shown on the screen.
Select “2” when you initialize the encryption board.
We recommend checking the board connection before starting initialization
Attention!
Once initialization
is started,you
cannot cancel it.
is that OK?
[2]= Yes
[other keys]=No
●
Relevant Error Codes
E602 and detailed codes
E code Description Cause
Detection
Timing
Actions
E602
-2000
Authentication Error Error in authentication
between the host
machine and the
encryption board
Start-up Check connections between
the encryption board and
the HDD and between the
encryption board and the main
controller 2. This error may be
triggered after replacement
of the encryption board or the
main controller 2. At any rate,
this error disables accesses to
HDD data. When no problem
is found in connections, use
SST to execute Key Clear >
Format > Install System.
Failure in Encryption
Board
Error in recognition of
the encryption board
Device Error Failure in the
encryption board
F-2-42
T-2-17
E610 and detailed codes
E code
Detailed
Code
Cause (Detected Error) Actions
E610 Failure in the HDD encryption key
0001 Failure in the HDD encryption key
(Error in hardware configuration). No
encryption board is installed.
Ask the user to check the hardware
configuration.
0002 Failure in the HDD encryption key
(Error in hardware configuration).
The memory space is insufficient for
encryption operation.
Ask the user to check the hardware
configuration.
0101 Failure in the HDD encryption key (Error
in initialization). Failed to initialize the
memory space where the key is stored.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by
hardware-related factors.
0102 Failure in the HDD encryption key (Error
in initialization). Failed to initialize the
encryption processing unit.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by
hardware-related factors.
0201 Failure in the HDD encryption key.
Error in the encryption processing unit.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by
hardware-related factors.
0202 Failure in the HDD encryption key.
Error in the encryption processing unit.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by
hardware-related factors.
0301 Failure in the HDD encryption key (Error
in the encryption key). Failed to create
the encryption key.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by
hardware-related factors.
0302 Failure in the HDD encryption key (Error
in the encryption key). Detected the
failure in the encryption key.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by a
hardware-related factor (SRAM). Note
that this error initializes the HDD.
0303 Failure in the HDD encryption key (Error
in the encryption key). Detected the
failure in the encryption key.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by a
hardware-related factor (SRAM). Note
that this error initializes the HDD.
0401 Failure in the HDD encryption key (Error
in the encryption processing). Error is
detected during the encryption process.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by a
hardware-related factor (the encryption
board).
0402 Failure in the HDD encryption key (Error
in the encryption processing). Error is
detected during the decoding process.
Turn OFF/ON the power. If the error is
not recovered, this may be caused by a
hardware-related factor (the encryption
board).
T-2-18