Canon imageRUNNER ADVANCE 6055 Series, Руководство по обслуживанию

Страница: 117 / 1406

2
2
2-63
2-63
Technology > Image Formation System > Controls > Separation
Technology > Image Formation System > Controls > Separation
<Separation from the ETB>
Separation is performed using the curvature separation method and the Static Eliminator.
There is no bias for separation.
Transfer Belt Separation Guide
Paper
Static Eliminator
Separation Guide
Static Eliminator
Transfer Belt
F-2-89
● Separation Claw Reciprocation Control
By moving the Separation Claw back and forth (reciprocation), scar on the drum caused by
the Separation Claw can be prevented.
<Execution Timing>
During printing (while the Developing Motor is driving)
<Control Description>
Making the Separation Claw move back and forth by transmitting the rotation force of the
Developing Motor Drive via the cam and Gear Unit.
Reciprocation width: +/-25mm
1) The drive of the Developing Drive Motor makes the cam rotate.
2) The Drive Lever moves in a pendulum motion by the rotation of the cam, which make
the Drive Shaft rotates. (With the one-way bearing, the Drive Shaft rotates in only one
direction.)
3) Making the Lack move back and forth by transmitting the rotating motion of the Drive Shaft
via the Gear Unit. The Separation Mounting Base linked with the Lack moves back and
forth.
M1
M1
Separation Claw Mounting Base
Gear Unit
Lack
Drive Shaft
Cam Drive Lever
F-2-90