Canon imageRUNNER ADVANCE 6055 Series, Руководство по обслуживанию

Страница: 71 / 1406

2
2
2-17
2-17
Technology > Main Controller > Controls > Security features (encryption key and certificate, password protection)
Technology > Main Controller > Controls > Security features (encryption key and certificate, password protection)
1. Enable Functionality
NOTE:Setup of “System Management PIN”
It is recommended for users (administrators) to set the system management PIN
before installing TPM. The TPM key is backed up after the TPM setting is set to “ON”.
However, the key backup is permitted only once. Unless the key is properly backed up,
users other than administrators may illegally obtain the backup file. To avoid such risks
effectively, the system management PIN should be set.
1)Set Management Setting > Data Management > TPM Setting to “ON”.
Setting / Registration
2) Click “Yes”, and restart the machine.
This setting is enabled after the machine is restarted.
F-2-23
F-2-24
2.TPM Key Backup
The TPM key backup file can be stored only in USB flash drive (supported file system:
FAT32).
Note that this file requires the memory free space of several MBs.
1) Insert the USB flash drive to the machine.
The USB I/F (host) is found at the side of the control panel as well as the main
controller PCB.
CAUTION:
Ensure to insert only one USB flash drive.
If the backup job is started with 2 or more USB flash drives connected, the message is
shown to notify that the backup is failed.
NOTE:
The USB flash drive holds the TPM key backup files by serial number. Thus, backup
files for multiple machines can be saved in a USB flash drive.
2)Click [Back up TPM Key] in Management Setting > Data Management > TPM Setting.
F-2-25
F-2-26