Canon imageRUNNER ADVANCE 6055 Series, Руководство по обслуживанию

Страница: 1125 / 1406

9
9
9-128
9-128
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Installing the HDD Case Unit
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Installing the HDD Case Unit
2) Connect the CH A Cable (FK2-7832) to the Main Controller PCB 2.
• 2 Connectors
• 1 Edge Saddle
• 4 Wire Saddles
NOTE:
Be sure not to close the 2 Wire Saddles [A] in this step.
Ch.A
x2
x5
[A]
CAUTION:
Check that the connector of the Signal Cable is connected properly and that the cable
is not overloaded.
F-9-295
F-9-294
3) Fold extra length of the CH B Cable (FK2-7837), and secure it with the 2 Wire Saddles.
CAUTION:
• Be sure that the cable is not in contact with the stepped screw [A] of Drawer.
• When securing the cable, be sure that it does not go over to the front.
• When the FAX Board is installed, be sure to avoid contact of the cable with the PCB
to secure the cable.
Ch.B
[A]
x2
4) Insert the assembled Removable HDD.
F-9-296
F-9-297