Canon imageRUNNER ADVANCE 6055 Series, Руководство по обслуживанию

Страница: 954 / 1406

8
8
8-172
8-172
Service Mode > COPIER > OPTION > ACC
Service Mode > COPIER > OPTION > ACC
COPIER > OPTION > ACC
MIC-TUN Manual adj of voice recognize microphone
Lv.1 Details To manually adjust the voice receiving level (sensitivity) of the
connected voice recognition microphone.
Microphone sensitivity is automatically tuned in user mode; however,
adjust it manually as needed.
Use case When the sensitivity of microphone is not improved by auto tuning
Display/adj/set range 0 to 255
Default value 128
Related user mode Preferences > Accessibility > Voice Navigation Settings > Tune
Microphone
SRL-SPSW Setting of Serial I/F Kit support
Lv.1 Details To set the support level of the Serial Interface Kit.
To keep processing performance of printer engine, select “1: Priority
on speed”.
To correctly stop the output by the upper limit number of sheets,
select “2: Priority on upper limit number of sheets”.
Use case At installation of Serial Interface Kit
Caution With priority on speed, output cannot be correctly stopped by the
upper limit number of sheets.
With priority on the upper limit number of sheets, processing
performance of the printer engine is decreased depending on pickup
location.
Display/adj/set range 0 to 2
0: No support, 1: Priority on speed, 2: Priority on upper limit number
of sheets
Default value 0
PDL-THR Norm PDL pnt set:External charge mode6/7
Lv.2 Details To set normal PDL print job processing at external charge mode 6/7.
When 1 is set and external charge mode 6/7 is set with COIN,
normal PDL print job is executed without being cancelled.
Use case When setting the normal PDL print processing in external charge
mode 6/7
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Cancel, 1: Execute
Default value 0
Related service mode COPIER> OPTION> ACC> COIN
COPIER > OPTION > ACC
CR-TYPE Setting of Card Reader
Lv.1 Details To set the model of the Card Reader.
Set 1 in the case of connecting the Card Reader-C1. It operates
even 0 is set, but recognition rate decreases.
Use case When connecting the Card Reader-C1
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Card Reader-F1, 1: Card Reader-C1
Default value 0
T-8-68