Canon imageRUNNER ADVANCE 6055 Series, Руководство по обслуживанию

Страница: 112 / 1406

2
2
2-58
2-58
Technology > Image Formation System > Controls > Transfer
Technology > Image Formation System > Controls > Transfer
<Opening and Closing Operations of the Buffer Shutter>
By pushing the Developing Assembly in the main body, edge of the Supply Mouth on the
assembly hits to leading edge of the Buffer Shutter.
By pushing the assembly in farther, the Buffer Shutter moves to the rear so the Supply Mouth
is opened.
The Shutter Arm goes down by spring pressure, and it interlocks with the protrusion on the
Developing Shutter.
By pulling the Developing Assembly out, the Shutter Arm is pushed by the protrusion on the
Developing Shutter, so the Buffer Shutter is closed followed by the Supply Mouth. The Shutter
Arm lifts up by hitting to the bottom of the Hopper.
Projection
Spring
Toner
Push
Developing Assembly
Buffer Assembly Shutter Open
Buffer Assembly Shutter
Buffer Assembly Shutter
Buffer Assembly
Buffer Assembly
Developing Assembly
F-2-80
■
Transfer
● Pre-transfer Charging Bias Control
To make the charging amount of toner on the Photosensitive Drum appropriate to improve
transfer performance.
The pre-transfer charging bias (AC + DC negative), which has been generated on the Pre-
transfer Charging PCB (PCB26), is applied to the Pre-transfer Charging Wire.
AC+DC negative
Pre-transfer Charging PCB(PCB26)
Pre-transfer Charging Wire
Photosensitive Drum
F-2-81