Canon imageRUNNER ADVANCE 6055 Series, Руководство по обслуживанию

Страница: 122 / 1406

2
2
2-68
2-68
Technology > Image Formation System > Controls > Toner Supply Area
Technology > Image Formation System > Controls > Toner Supply Area
<Environment Control>
Environment control 1: The condition of the heater at the time of turning OFF the main
power continues.
Environment control 2: Whether to turn ON or OFF the heater is determined by the
environment (moisture content) right before moving to sleep state, and the condition
continues while the power is OFF or the machine is at sleep state.
Environment Moisture content Temperature/Humidity Drum Heater
1 0.86 23 deg C 5% OFF
2 1.73 23deg C 10%
3 5.8 23 deg C 30%
4 8.9 23 deg C 50%
5 15 23 deg C 70% ON
6 18 27 deg C 80%
7 12.41 30 deg C 80%
Environment control 3: Basically the heater is ON. ON or OFF of the heater can be
switched depending on the moisture contents when the duration time of standby mode/
energy saving mode is long (4 hours at minimum).
<Related service modes>
COPIER > OPTION > IMG-MCON > DRM-H-SW: To set ON/OFF of the Drum Heater.
0: Normal mode (ON/OFF of the Drum Heater is determined when moving to sleep 1.)
(Default)
1: Drum Heater ON mode *(The Drum Heater must be turned ON when moving to sleep 1
while the 2-dimensional shading-related control is OFF.)
2: Energy saving mode (The Drum Heater is OFF when moving to sleep 1.)
* The mode differs from 2-dimensional shading ON (image priority mode). This mode is for
users who just want to turn ON the Drum Heater when startup time is delayed because of
the increase of controls due to 2-dimensional shading ON.
COPIER > OPTION > IMG-LSR > 2D-SHADE: Image priority mode (2-dimensional
shading).
ON/OFF
0: 2-dimensional shading OFF (Default)
1: 2-dimensional shading ON (The Drum Heater is turned ON at first time for the day, sleep,
standby/energy saving, potential control, and 2-dimensional shading.)
T-2-38
■
Toner Supply Area
● Toner Container Detection
Toner Container detection is not performed with this machine.
● Toner Level Detection/Toner Supply Control
Toner Supply Control
To supply toner in the Toner Container to the Developing Assembly.
The Magnet Roller helps toner supplied to the Developing Assembly uniformly in the
longitudinal direction to form an even toner layer in the Developing Cylinder
M28
M10
Buffer Unit
Developing Assembly
Toner Feed Motor
Toner Stirrer
Toner Container
Hopper Unit
Sub Hopper
Toner Excess Supply Sensor
(TS2)
Buffer Toner Sensor 2
(TS3)
Developing Toner Sensor
(TS1)
Toner Supply Motor
Magnet Roller
Toner Feed Screw
CL5
Title Description Supply timing
Operation of the host
machine
Supply to the
Hopper
Toner in the Toner
Container is supplied
to the Buffer Unit.
When the Buffer Toner Sensor
(TS3) detects absence of
toner
To drive the Toner Supply
Motor (M10).
To be executed until TS3
detects presence of toner.
Supply to the
Developing
Assembly
Developer in the Buffer
Unit is supplied to the
Developing Assembly.
When the Developing
Toner Sensor (TS1) detects
absence of toner
To drive the Toner Feed
Motor (M28).
To be executed until TS1
detects presence of toner.
F-2-95
T-2-39