Canon ImagePRESS Server H350 V2, Руководство по обслуживанию

Страница: 111 / 117

9.
Connect the power plug to the outlet of the
imagePRESS Server.
CAUTION:
Be sure to use an outlet of a system different from that
of the host machine.
10.
Remove the Protection Sheet on the imagePRESS
Server Panel.
11.
After turning ON the imagePRESS Server power,
turn ON the main power switch.
12.
When the message "Turn ON the main power of the
host machine again." is displayed on the Touch
Panel, turn OFF the main power switch. (It may take
approx. 10 minutes before the message appears.)
CAUTION:
The imagePRESS Server is automatically restarted
only at the first time when it is connected. It takes about
approx. 5 minutes until it is ready for use.
Do not press the buttons on the imagePRESS Server
until it is ready for use.
13.
Turn ON the main power switch again.
14.
Check that the value of the following service mode
(Level 1) is "464".
COPIER > OPTION > INT-FACE > CNT-TYPE
8. INSTALLATION PROCEDURE
104