![background image](http://html.mh-extra.com/html/canon/dr-x10c-imageformula-document-scanner/dr-x10c-imageformula-document-scanner_service-manual_62895180.webp)
5-18
COPYRIGHT © CANON ELECTRONICS INC. 2008
CANON DR-X10C FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
e.
Motor, clutch
Check the operation of the motor and
clutch. The list below shows target parts.
Display Target
name
Pick Motor
Pickup motor
Feed Motor
Feed motor
¼
Feed roller
¼
Reverse roller
Separate
Motor
Separation motor
Eject Motor
Eject motor
Clutch Front
Magnetic clutch (front)
¼
Registration roller
Clutch Rear
Magnetic clutch (rear)
¼
Reading roller (front)
Tray Motor
Tray motor
¼
Pickup tray up/down
Blower Top
Blower of the reading unit
(upper)
Blower
Bottom
Blower of the reading unit
(lower)
Fan Exhaust
fan
Image Unit
Shading motor
¼
CIS unit position
Black White
Platen motor
¼
Background
Panel
Pickup up/down motor
Pick Up Down Reverse up/down motor
Table 5-311
The following describes the operation
method and selection items by type.
1) Pick/Feed/Main/Separate Motor
When the [On] button on the right side is
selected first, and then conditions are se-
lected from the [Speed] and [Direction]
pulldown boxes, the motor runs accord-
ingly.
However, conditions that do not match each
motor are not displayed.
When [Stop] on the pulldown box is se-
lected or the [On] button is selected again,
the motor stops.
The figure below shows each selection
screen.
Pick Motor
Feed Motor
Main Motor
Separate Motor
Figure 5-316
2) Others
When conditions are selected from the
pulldown box, the motor or clutch is driven
accordingly.
The figure below shows each selection
screen.