![background image](http://html1.mh-extra.com/html/vicon/v3200ap-series/v3200ap-series_instructions-for-installation-and-operation-manual_1013003001.webp)
VICON
t
REF. NOTES
SHEET NO. REV.
SEC.
SUPERCEDES
INSTRUCTIONS FOR
X328-384
X328
885
1
INSTALLATION AND OPERATION
MODEL
AND
SERIES
SCANNERS MICROSCAN,
GENERAL
SCOPE
The information in this instruction manual covers the installa-
tion, operation, and maintenance of the following indoor
scanners:
V32 1 OAP
V32 1 O-24AP
Throughout this manual,
is used to refer to all
light-duty scanner models.
is used to refer to all
medium-duty scanners. Both models have round mounting
bases.
These units should be installed using approved materials
and wiring practices in accordance with the National
Electrical Code and applicable local wiring ordinances.
INDOOR SCANNER
INTRODUCTION
tion-free operation. These injection-molded scanners have
The
and the
Series Scanners are
both a permanent stop to permit full 360 degrees rotation
continuous-duty units rated for loads up to 15 pounds
and adjustable limit stops to set pan travel limits ar desired.
and 25 pounds
respectively, when
mounted in either the upright or inverted positions.
The scanners are energized using the appropriate control
speed, high-torque drive motors with instant start-stop
units. Refer to Table A line cord option (Model
is
characteristics provide operational stability without coast.
available for the
and
models enabling
Drive trains made with acetal output gears provide
them to
without the use of a control unit.
TABLE I
SCANNER/CONTROL COMPATIBILITY AND OPERATING DISTANCES
Control Model
Scanner Model
Working Voltage*
Wire Size (AWG)
Annealed Copper
Maximum Distance
2 2
10,000 (3,048)
2 2
5,000 (1,524)
2 2
1,000 (305)
24V
2 0
1,500 (457)
18
2,500 (762)
16
4.000 (1,219)
2 2
3 5 0 (107)
24V
2 0
5 5 0 (167)
18
9 0 0 (274)
16
1,400 (427)
*Working voltage refers to the voltage carried by the cable entering scanner
WARNING: TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Product specifications subject to change without notice.
VICON INDUSTRIES,
INC. 525 BROAD HOLLOW ROAD, MELVILLE, N.Y.
(516) 293-2200TELEX: 144581
TOLL FREE:
(OUTSIDE OF NEW YORK)