![background image](http://html.mh-extra.com/html/canon/dr-x10c-imageformula-document-scanner/dr-x10c-imageformula-document-scanner_service-manual_62895185.webp)
COPYRIGHT © CANON ELECTRONICS INC. 2008 CANON DR-X10C FIRST EDITION
5-23
CHAPTER 5 TROUBLESHOOTING
3) Status
Check the state of the imprinter. The mark
of each item lights according to its state.
Mark
Sensor name/lighting state
Busy
Lights during normal operation.
However, it does not light in ser-
vice mode.
Head
Lights when the ink cartridge is
installed.
Move
Lights when the cartridge unit is
moved during opening or closing
the cover.
Home
Lights when the machine is nor-
mal.
Move error
Lights when a motor or sensor
error occurs.
Voltage error
Lights when the applied voltage is
abnormal.
Mask
Lights when the cartridge is in the
non-printing area.
Communication error
Lights when a data communication
error occurs or the PCB failure is
defective.
Table 5-312
i.
Patchcode
The operation check of the patchcode de-
coder is performed in this mode. When the
[Patchcode] tab is selected, a screen is
displayed.
Figure 5-328
Operation Procedure
1) Set a sheet of paper on which a patchcode
is printed on the pickup tray. The patchcode
should be on the top surface.
2) Select setting items of [Speed] and [Ori-
entation] from the pulldown boxes.
Figure 5-329
3) Select the [START] button. The pickup tray
lifts and the paper is fed and ejected onto
the eject tray.
4) The results are displayed.
Figure 5-330