3-6
COPYRIGHT © CANON ELECTRONICS INC. 2008
CANON DR-X10C FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY
4. Top Cover
1) Remove the right and left covers.
2) Remove screw
{
1
(round tips), and while
unhooking 2 pairs of the fitting parts
{
2
,
remove the top cover
{
3
.
Figure 3-211
5. Pickup Tray Unit
1) Remove the right and left covers.
2) Remove the screw
{
1
(TP head) and
remove the lock shaft
{
2
. Remove screw
{
3
(M3, round tips), and while unhooking
2 pairs of the fitting parts
{
4
, remove the
cover
{
5
. In the same way, remove the
lock shaft and the cover on the opposite
side.
Note:
A light guide for the sensor is built in the
right cover.
Figure 3-212
3) Lift and remove the pickup tray unit
{
1
along the guide.
Note:
When the coil spring
{
2
is removed
and the shaft
{
3
is removed, it is easier
to remove the pickup tray unit. Refer to
the "VI. 4. Entire Upper Unit" section.
Figure 3-213