COPYRIGHT © CANON ELECTRONICS INC. 2008 CANON DR-X10C FIRST EDITION
3-41
CHAPTER 3 DISASSEMBLY & REASSEMBLY
3. Upper Front Cover
1) Remove the eject tray unit.
2) Remove 2 screws
{
1
(TP head).
Figure 3-604
3) Open the pickup roller cover. Press the
rear side
{
1
(marked with
¼
) of both arms
and unhook the fitting parts inside. The
pickup roller cover opens further.
Figure 3-605
4) Remove 2 screws
{
1
(TP head) and pull
out the upper front cover
{
2
to the front.
Note:
Since the internal open/close button
shaft unit is combined with a part of the
upper front cover, there is some resis-
tance when the cover is pulled out, but it
can be removed easily by pulling it.
Figure 3-606
Notes on assembling
When mounting the upper front cover, first
insert the open/close button into the hole at
the center of the upper front cover.
