Browning MAXUS, Руководство пользователя

Страница: 23 / 130

21
6 The bolt and bolt slide can now be separated for cleaning (Figure
31). Perform cleaning of the bolt and receiver cavity as necessary.
NOTICE! do not disasseMble the bolt asseMbly beyond this
Point.
r e i n s tA l l i n G t h e b o lt A s s e m b lY
1 Reassemble the bolt and bolt slide (Figure 32).
2 Place a few drops of oil in the grooves in the bolt to lubricate
the bolt slide rails (Figure 3).
3 Align the rails on the bolt slide with the grooves in the receiver.
Press the bolt release button and slide the bolt assembly into the
receiver, bolt slide link end first.
4 Ensure the bolt slide link fits into the socket in the recoil spring
follower (Figure 33).
5 Replace the operating handle by inserting it in its slot in the bolt.
6 Open and close the action several times to make sure the bolt slide
link and recoil spring follower are properly engaged.
NOTICE! never allow the action to slaM closed by Pressing the
bolt release button without having the barrel installed.
daMage will result to the receiver and oPerating handle.
c l e A n i n G t h e A c t i o n
1 When the action becomes excessively dirty, remove the trigger
group and bolt assemblies from the receiver as explained under
˝Removal of the Trigger Group” and ˝Removal of the Bolt
Assembly”. Clean with a gun solvent as necessary, using a nylon
brush to loosen any caked-on grime.
Wipe the receiver cavity clean. Lightly oil the cavity and wipe it
dry. No further disassembly is required for cleaning.
2 Reassemble the trigger group, bolt assembly, gas system and the
barrel to the receiver as explained previously. Then wipe all
exposed metal surfaces with an oiled cloth, making sure to wipe
clean all finger marks where moisture could accumulate.
3 The barrel and action should be inspected thoroughly to be certain
no cleaning patches have been inadvertently left in them.
l u b r i c A t i n G t h e A c t i o n t u b e A n d s p r i n G
beFore lubricating the action tube and sPring, Place the ˝saFety” in the on saFe Position. oPen
the action and MaKe certain your shotgun is coMPletely unloaded. KeeP the MuZZle Pointed in
a saFe direction. Failure to Follow these warnings could result in serious injury or death.
wear eye Protection when disasseMbling and lubricating your shotgun to Prevent sPrings,
sPring-loaded Parts, solvents or other agents FroM contacting your eyes, resulting in injury.
KeeP all aMMunition away FroM the cleaning area. never test the Mechanical Function oF your
shotgun with live aMMunition. Failure to Follow these warnings could result in serious
injury or death.
Figure 31
the bolt and bolt slide can be separated
for cleaning.
Figure 32
the bolt shown assembled.
Figure 33
Guide the bolt slide link into its socket in the
recoil spring follower.
E
N
BRO5180_Maxus A5_v7.indd 21 02/03/10 13:30