manualshive.com logo in svg

Brocade Communications Systems FastIron, Руководство администратора, Страница: 386 / 388

Поделиться
Скачать
Brocade Communications Systems FastIron Скачать руководство пользователя страница 386

Young should be given attribution as the author of the parts of the library used. This can be in the form
of a textual message at program startup or in documentation (online or textual) provided with the
package.

1. Redistribution and use in source and binary forms, with or without modification, are permitted

provided that the following conditions are met:

2. Redistributions of source code must retain the copyright notice, this list of conditions and the

following disclaimer.

3. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and

the following disclaimer in the documentation and/or other materials provided with the distribution.
All advertising materials mentioning features or use of this software must display the following
acknowledgment: "This product includes cryptographic software written by Eric
Young

([email protected])

" The word 'cryptographic' can be left out if the rouines from the library

being used are not cryptographic related.

4. If you include any Windows specific code (or a derivative thereof) from the apps directory

(application code) you must include an acknowledgment: "This product includes software written by
Tim Hudson 

([email protected])

"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and
distribution terms for any publically available version or derivative of this code cannot be changed.
i.e. this code cannot simply be copied and put under another distribution licence.

OpenSSL License

386

FastIron Ethernet Switch Administration Guide

53-1003625-01

Содержание FastIron





































































































































































































































































































































































































Отзывы:

Нет отзывов