manualshive.com logo in svg

Brocade Communications Systems FastIron, Руководство администратора, Страница: 312 / 388

Поделиться
Скачать
Brocade Communications Systems FastIron Скачать руководство пользователя страница 312

Message

Port portnum , srcip-security max-ipaddr-per-int
reached.Last IP= ipaddr

Explanation

The address limit specified by the 

srcip-security max-ipaddr-per-

interface

 command has been reached for the port.

Message Level

Informational

Message

Security: console login by username to USER |
PRIVILEGE EXEC mode

Explanation

The specified user logged into the device console into the specified EXEC
mode.

Message Level

Informational

Message

Security: console logout by username

Explanation

The specified user logged out of the device console.

Message Level

Informational

Message

Security: telnet | SSH login by username from src
IP i p-address , src MAC mac-address to USER |
PRIVILEGE EXEC mode

Explanation

The specified user logged into the device using Telnet or SSH from either
or both the specified IP address and MAC address. The user logged into
the specified EXEC mode.

Message Level

Informational

Message

Security: telnet | SSH logout by username from
src IP ip-address, src MAC mac-address to USER |
PRIVILEGE EXEC mode

Explanation

The specified user logged out of the device. The user was using Telnet or
SSH to access the device from either or both the specified IP address and
MAC address. The user logged out of the specified EXEC mode.

Message Level

Informational

Message

SNMP read-only community | read-write community |
contact | location | user | group | view |
engineld | trap [host] [ value -str ] deleted |
added | modified from console | telnet | ssh|
snmp session

Syslog messages

312

FastIron Ethernet Switch Administration Guide

53-1003625-01

Содержание FastIron





































































































































































































































































































































































































Отзывы:

Нет отзывов