manualshive.com logo in svg

Brocade Communications Systems FastIron, Руководство администратора, Страница: 13 / 388

Поделиться
Скачать
Brocade Communications Systems FastIron Скачать руководство пользователя страница 13

Brocade resources

Visit the Brocade website to locate related documentation for your product and additional Brocade
resources.

You can download additional publications supporting your product at 

www.brocade.com

. Select the

Brocade Products tab to locate your product, then click the Brocade product name or image to open the
individual product page. The user manuals are available in the resources module at the bottom of the
page under the Documentation category.

To get up-to-the-minute information on Brocade products and resources, go to 

MyBrocade

. You can

register at no cost to obtain a user ID and password.

Release notes are available on 

MyBrocade

 under Product Downloads.

White papers, online demonstrations, and data sheets are available through the 

Brocade website

.

Contacting Brocade Technical Support

As a Brocade customer, you can contact Brocade Technical Support 24x7 online, by telephone, or by e-
mail. Brocade OEM customers contact their OEM/Solutions provider.

Brocade customers

For product support information and the latest information on contacting the Technical Assistance
Center, go to 

http://www.brocade.com/services-support/index.html

.

If you have purchased Brocade product support directly from Brocade, use one of the following methods
to contact the Brocade Technical Assistance Center 24x7.

Online

Telephone

E-mail

Preferred method of contact for non-
urgent issues:

•

My Cases

 through MyBrocade

•

Software downloads

 and licensing

tools

•

Knowledge Base

Required for Sev 1-Critical and Sev
2-High issues:

• Continental US: 1-800-752-8061
• Europe, Middle East, Africa, and

Asia Pacific: +800-AT FIBREE
(+800 28 34 27 33)

• For areas unable to access toll

free number: +1-408-333-6061

•

Toll-free numbers

 are available in

many countries.

[email protected]

Please include:

• Problem summary
• Serial number
• Installation details
• Environment description

Brocade OEM customers

If you have purchased Brocade product support from a Brocade OEM/Solution Provider, contact your
OEM/Solution Provider for all of your product support needs.

• OEM/Solution Providers are trained and certified by Brocade to support Brocade

®

 products.

• Brocade provides backline support for issues that cannot be resolved by the OEM/Solution Provider.

Brocade resources

FastIron Ethernet Switch Administration Guide

13

53-1003625-01

Содержание FastIron





































































































































































































































































































































































































Отзывы:

Нет отзывов