manualshive.com logo in svg

Brocade Communications Systems FastIron, Руководство администратора, Страница: 292 / 388

Поделиться
Скачать
Brocade Communications Systems FastIron Скачать руководство пользователя страница 292

The default number of messages is 50. For FastIron devices, you can set the Syslog buffer limit from 1
- 1000 entries.

Local buffer configuration notes

• You must save the configuration and reload the software to place the change into effect.
• If you decrease the size of the buffer, the software clears the buffer before placing the change into

effect.

• If you increase the size of the Syslog buffer, the software will clear some of the older locally

buffered Syslog messages.

Changing the log facility

The Syslog daemon on the Syslog server uses a facility to determine where to log the messages from
the Brocade device. The default facility for messages the Brocade device sends to the Syslog server is
"user". You can change the facility using the following command.

NOTE

You can specify only one facility. If you configure the Brocade device to use two Syslog servers, the
device uses the same facility on both servers.

device(config)#logging facility local0

Syntax:

 

loggingfacility

 

facility-name

The 

facility-name

 can be one of the following:

• kern - kernel messages
• user - random user-level messages
• mail - mail system
• daemon - system daemons
• auth - security or authorization messages
• syslog - messages generated internally by Syslog
• lpr - line printer subsystem
• news - netnews subsystem
• uucp - uucp subsystem
• sys9 - cron/at subsystem
• sys10 - reserved for system use
• sys11 - reserved for system use
• sys12 - reserved for system use
• sys13 - reserved for system use
• sys14 - reserved for system use
• cron - cron/at subsystem
• local0 - reserved for local use
• local1 - reserved for local use
• local2 - reserved for local use
• local3 - reserved for local use
• local4 - reserved for local use
• local5 - reserved for local use
• local6 - reserved for local use
• local7 - reserved for local use

Local buffer configuration notes

292

FastIron Ethernet Switch Administration Guide

53-1003625-01

Содержание FastIron





































































































































































































































































































































































































Отзывы:

Нет отзывов