manualshive.com logo in svg

Brocade Communications Systems FastIron, Руководство администратора, Страница: 179 / 388

Поделиться
Скачать
Brocade Communications Systems FastIron Скачать руководство пользователя страница 179

‐

Port description

‐

System name

‐

System description

‐

System capabilities

‐

Management address

‐

End of LLDPDU

•

Organizationally-specific TLVs

 are optional in LLDP implementations and are defined and encoded

by individual organizations or vendors. These TLVs include support for, but are not limited to, the
IEEE 802.1 and 802.3 standards and the TIA-1057 standard.

Brocade devices support the following Organizationally-specific TLVs:

•

‐

802.1 organizationally-specific TLVs

Port VLAN ID

VLAN name TLV

•

‐

802.3 organizationally-specific TLVs

MAC/PHY configuration/status

Power through MDI

Link aggregation

Maximum frame size

LLDP-MED TLVs

Brocade devices honor and send the following LLDP-MED TLVs, as defined in the TIA-1057 standard:

• LLDP-MED capabilities
• Network policy
• Location identification
• Extended power-via-MDI

Mandatory TLVs

When an LLDP agent transmits LLDP packets to other agents in the same 802 LAN segments, the
following mandatory TLVs are always included:

• Chassis ID
• Port ID
• Time to Live (TTL)

This section describes the above TLVs in detail.

Chassis ID

The Chassis ID identifies the device that sent the LLDP packets.

There are several ways in which a device may be identified. A chassis ID subtype, included in the TLV
and shown in the following table, indicates how the device is being referenced in the Chassis ID field.

LLDP-MED TLVs

FastIron Ethernet Switch Administration Guide

179

53-1003625-01

Содержание FastIron





































































































































































































































































































































































































Отзывы:

Нет отзывов