manualshive.com logo in svg

Brocade Communications Systems FastIron, Руководство администратора, Страница: 307 / 388

Поделиться
Скачать
Brocade Communications Systems FastIron Скачать руководство пользователя страница 307

Message

DOT1X: port portnum - MAC mac address Downloading
an IP ACL, but IP ACL have no effect on a switch
port

Explanation

The RADIUS server returned an IP ACL, but the portnum is a switch port
(no IP address).

Message Level

Informational

Message

DOT1X:port portnum - MAC mac address Error -
could not add all MAC filters

Explanation

The Brocade device was unable to implement the MAC address filters
returned by the RADIUS server.

Message Level

Informational

Message

DOT1X: port portnum - MAC mac address Invalid MAC
filter ID - this ID doesn't exist

Explanation

The MAC address filter ID returned by the RADIUS server does not exist in
the Brocade configuration.

Message Level

Informational

Message

DOT1X: port portnum - MAC mac address Invalid MAC
filter ID - this ID is user defined and cannot be
used

Explanation

The port was assigned a MAC address filter ID that had been dynamically
created by another user.

Message Level

Informational

Message

DOT1X: port portnum - MAC mac address is
unauthorized because system resource is not
enough or the invalid information to set the
dynamic assigned IP ACLs or MAC address filters

Explanation

802.1X authentication failed for the Client with the specified mac address
on the specified portnum either due to insufficient system resources on the
device, or due to invalid IP ACL or MAC address filter information returned
by the RADIUS server.

Message
Level

Informational

Syslog messages

FastIron Ethernet Switch Administration Guide

307

53-1003625-01

Содержание FastIron





































































































































































































































































































































































































Отзывы:

Нет отзывов