Brocade Communications Systems FastIron Скачать руководство пользователя страница 305

Страница: 305 / 388

Explanation

A user has logged out of the USER EXEC mode of the CLI.

The user-name is the user name.

Message Level

Informational

Message

Explanation

A user created, modified, deleted, or applied an ACL through an SNMP,
console, SSH, or Telnet session.

Message Level

Informational

Message

Bridge is new root, vlan vlan-id , root ID root-
id

Explanation

A Spanning Tree Protocol (STP) topology change has occurred, resulting
in the Brocade device becoming the root bridge.

The vlan-id is the ID of the VLAN in which the STP topology change
occurred.

The root-id is the STP bridge root ID.

Message Level

Informational

Message

Bridge root changed, vlan vlan-id , new root ID
string , root interface portnum

Explanation

A Spanning Tree Protocol (STP) topology change has occurred.

The vlan-id is the ID of the VLAN in which the STP topology change
occurred.

The root-id is the STP bridge root ID.

The portnum is the number of the port connected to the new root bridge.

Message Level

Informational

Message

Bridge topology change, vlan vlan-id , interface
portnum , changed state to stp-state

Explanation

A Spanning Tree Protocol (STP) topology change has occurred on a port.

The vlan-id is the ID of the VLAN in which the STP topology change
occurred.

The portnum is the port number.

The stp-state is the new STP state and can be one of the following:

Syslog messages

FastIron Ethernet Switch Administration Guide

305

53-1003625-01

Содержание FastIron





































































































































































































































































































































































































Результаты поиска

Содержание FastIron

Отзывы:

Brocade Communications Systems FastIron, Руководство администратора, Страница: 305 / 388

Результаты поиска

Содержание FastIron

Отзывы: