manualshive.com logo in svg

Brocade Communications Systems FastIron, Руководство администратора, Страница: 212 / 388

Поделиться
Скачать
Brocade Communications Systems FastIron Скачать руководство пользователя страница 212

Field

Description

Lcl Port

The local LLDP port number.

Chassis ID

The identifier for the chassis.

Brocade devices use the base MAC address of the device as the Chassis ID.

Port ID

The identifier for the port.

Brocade devices use the permanent MAC address associated with the port as the port ID.

Port Description The description for the port.

Brocade devices use the ifDescr MIB object from MIB-II as the port description.

System Name

The administratively-assigned name for the system.

Brocade devices use the sysName MIB object from MIB-II, which corresponds to the CLI

hostname

 command setting.

NOTE

A tilde (~) at the end of a line indicates that the value in the field is too long to display in full and
is truncated.

Displaying LLDP neighbors detail

The 

show lldp neighbors detail

 command displays the LLDP advertisements received from LLDP

neighbors.

The following shows an example 

show lldp neighbors detail

 report.

NOTE

The 

show lldp neighbors detail

 output will vary depending on the data received. Also, values that

are not recognized or do not have a recognizable format, may be displayed in hexadecimal binary
form.

device#show lldp neighbors detail ports e 1/9

Local port: 1/9

  Neighbor: 0000.0018.cc03, TTL 101 seconds

    + Chassis ID (network address): 10.43.39.151

    + Port ID (MAC address): 0000.0018.cc03

    + Time to live: 120 seconds

    + Port description    : "LAN port"

    + System name         : "regDN 1015,MITEL 5235 DM"

    + System description  : "regDN 1015,MITEL 5235 DM,h/w rev 2,ASIC rev 1,f/w\

                              Boot 02.01.00.11,f/w Main 02.01.00.11"

    + System capabilities : bridge, telephone

      Enabled capabilities: bridge, telephone

    + Management address (IPv4): 10.43.39.151

    + 802.3 MAC/PHY          : auto-negotiation enabled

      Advertised capabilities: 10BaseT-HD, 10BaseT-FD, 100BaseTX-HD,

                               100BaseTX-FD

      Operational MAU type   : 100BaseTX-FD

    + MED capabilities: capabilities, networkPolicy, extendedPD

      MED device type : Endpoint Class III

    + MED Network Policy

      Application Type  : Voice

      Policy Flags      : Known Policy, Tagged

Displaying LLDP neighbors detail

212

FastIron Ethernet Switch Administration Guide

53-1003625-01

Содержание FastIron





































































































































































































































































































































































































Отзывы:

Нет отзывов