Brocade Communications Systems FastIron, Руководство администратора, Страница: 278 / 388

Specifies that all stack units are cleared of errors.
Modes Global configuration mode.
Examples The following example clears the fabric adaptor sysmon counters.
Brocade(config)# clear sysmon counters fa error all
show sysmon logs
Displays the entries written to syslog for all event types if the action specified is to log them into
syslog. If the action specified is
none , the sysmon logs display nothing.
Syntax show sysmon logs
Modes Privileged EXEC mode.
Global configuration mode.
Examples The following example displays the syslog entries that were made by sysmon if the action specified
either at the global level or type level was to log the events to syslog. If the action specified was
none
,
no syslog entries exist.
Brocade(config)# show sysmon logs
Aug 3 03:59:22:C:Sysmon:XBAR LINK: SFM1/XBAR1/FPORT0 -- NO SYNC
Aug 3 03:59:22:C:Sysmon:FA Link: SLOT9/FA16/Link0 -- HG.Link error
Aug 3 03:58:22:W:Sysmon:PP ERROR: SLOT4/PP6 error occurred
Aug 3 03:59:34:W:Sysmon:FA ERROR: SLOT1/FA0 error occurred
Aug 3 03:60:34:W:Sysmon:XBAR ERROR: SFM1/XBAR1/FPORT2 -error occurred
The following table describes the output of this command:
show sysmon log s command output fields TABLE 38
Field Description
Date and time Aug 3 03:59:22
Critical or Warning A ‘C’ indicates a critical error and a ‘W’ indicates a warning.
Sysmon Message coming from Sysmon
Event type Possible values are FA ERROR, FA Link, XBAR ERROR, XBAR LINK, or PP ERROR
Component identifier Identifies the component of the system where the error was detected
Error A brief description of the error
show sysmon counters
Displays sysmon counters for all or specific event types.
show sysmon logs
278 FastIron Ethernet Switch Administration Guide
53-1003625-01