Bionet BM Elite Series, Инструкция по эксплуатации

Страница: 149 / 215

Rev. 5.01
149
A-2-2. Scale
Waveform display scale setup.
The selectable value is the
maximum pressure range shown in
the waveform. When you select a
range value, the selected pressure
range value is displayed below the
dotted line above the two dotted
lines in the left middle of the WAVE
window.
40.0 mmHg (5.3 vol%),
50.0 mmHg (6.6 vol%),
60.0 mmHg (7.9 vol%),
80.0 mmHg (10.5 vol%),
100.0 mmHg (13.2vol%),
150.0 mmHg (19.7 vol%),
300.0 mmHg (39.5 vol%),
500.0 mmHg (65.8 vol%),
800.0 mmHg (105.3 vol%),
1000.0 mmHg (131.6 vol%)
A-2-3. Fill Fill graph On / Off
A-2-4. Waveform Waveform select menu. EtCO2, AG
A-2-5. Use one gas unit
Choose whether to set pressure unit
by gas type. When OFF, each unit
setting menu for each gas type is
shown as below.
On / Off
A-2-6. Gas pressure unit
Displayed when USE ONE GAS UNIT
is ON. Select all gas unit.
mmHg/kPa/vol%
A-2-7. EtCO2 unit
Displayed when USE ONE GAS UNIT
is OFF. EtCO2 gas measurement unit
selection.
mmHg/kPa/vol%
A-2-8. FiCO2 unit
Displayed when USE ONE GAS UNIT
is OFF. FiCO2 gas measurement unit
selection.
mmHg/kPa/vol%
A-2-9. AG1 unit
Displayed when USE ONE GAS UNIT
is OFF. AG1 gas measurement unit
selection.
mmHg/kPa/vol%
A-3. APNEA detect
Displayed when USE ONE GAS UNIT
is OFF. EtCO2 gas measurement unit
selection.
mmHg/kPa/vol%
A-4. Module setup Module setup menu
A-4-1. AGENT ID1 Primary agent ID setup
A-4-2. Gas mode Gas status setup Sleep/ Measurement
A-4-3. Anesthetic gas Anesthetic gas setup ISO/ ENF/ SEV/ DES/ HAL