Bionet BM Elite Series, Инструкция по эксплуатации

Страница: 167 / 215

Rev. 5.01
167
Reusable SpO2 sensor
Clean the SpO2 sensor by wiping it with soapy water soaked gauze. Disinfect the sensor by wiping
with 70% alcohol solution. Allow the sensor to dry completely with a lint-free cloth before applying
to the animal.
Reusable Temperature probes and cables
Do not use excessive pressure or flex the cables as this can stretch the covering and break the
internal wires.
⚫
Clean the probes with a 3% hydrogen peroxide or 70% alcohol.
⚫
Quickly immerse the cables in a detergent solution.
⚫
Make sure the probe’s tip is firmly connected.
Capnostat sensor
Wipe the sensor surface and sensor window with a damp cloth. Do not attempt to wet the sensor
or disinfect it with hot water. Allow to dry completely with a lint-free cloth. Make sure the sensor
window is clean and dry before use.
IBP Transducer (BM5Vet Elite, BM7Vet Elite only)
Handle transducers and other pressure peripherals with care. Do not apply excessive pressure to
the conversion board. Do not expose the transducer to water, steam, dry heat sterilization, ether,
chloroform, or other similar chemicals. Always protect the connector from water.
Caution
Never boil or autoclave the cable. Vinyl withstands temperatures up to 100 ° C
but begins to soften at around 90 ° C. Handle gently when hot and wipe away
from the tip toward the cable.