Bionet BM Elite Series, Инструкция по эксплуатации

Страница: 101 / 215

Rev. 5.01
101
signal. Install a sensor at the tip of the animal's tongue for the SpO2 measurement.
Only use sensors provided by Bionet and apply them according to manufacturer's recommendations
on a per-sensor basis.
If the sensor is not attached correctly, the ambient light may interfere with the pulse oximetry,
making the measurement irregular or causing the value to disappear. If you suspect interference
from ambient light, make sure that the sensor is properly positioned and that the sensor cover with
the opaque body is covered.
1. Select the sensor type and size that best suits your animal.
2. If the sensor can be reused, please wash it before use for each animal.
3. Position the sensor correctly and attach it to the animal.
4. Connect the sensor to the patient cable.
5. Check the application area of the sensor from time to time. Fix the sensor so that it does
not move.
Note
Read the documentation that came with your sensor for the best application
technology and safety information. Never use a damaged sensor.
If the sensor does not turn on after connecting the sensor, observe that a
message appears on the monitor. If the sensor-LED does not turn on, replace
the sensor.