SYSTEM INSTALLATION MANUAL
89000016
4.
Materials Required But Not Supplied
A.
Materials Not Supplied
(1)
The following items are required for correct installation but not supplied:
• Wire and shielded wire
• Circuit breaker
• Ground terminals
• A valid WAAS GPS receiver with appropriate serial or ARINC 743 interface is required for
the KGX 130 Series (no GPS), 130R/130T, PN 89000016-130, -131.
(2)
The following GPS receivers listed in Table 1007, have been verified to supply position,
velocity, position accuracy, position integrity and velocity accuracy information properly
interpreted by the KGX 130 Series:
Table 1007. Compatible WAAS GPS Receivers
PN
Manufacturer
Model/Description
84100-XX-XXXX
FreeFlight Systems
FreeFlight Systems 1201
84327-XX-XXXX
FreeFlight Systems
FFS 1203/C
010-00409-01
010-00414-01
Garmin
400W/500W GPS with ADS-B
Plus Interface
066-01204-0101
066-01204-1101
066-01213-0101
066-01213-1101
BendixKing
KSN 765/770 Safety Navigator
B.
List of Other Approved WAAS GPS Antennas
(1)
The KGX 150 series, PN 89000016-150 or -151, can be installed with the WAAS GPS
antennas summarized in Table 1008.
Table 1008. Other Approved WAAS GPS Antennas
PN
1
Manufacturer
Model/Description
Mount Style
071-01620-0001
Honeywell
KA 96 GPS
Screw mount
575-9
Aero Antenna
A-33 GPS
Screw mount
575-93
Aero Antenna
A-34 GPS
Screw mount
NOTE:
1
To use these antennas they must be connected with a cable having a maximum of 5 dB loss and 1-ohm DC
resistance. Refer to
Paragraph 15
in the
INSTALLATION
section for additional GPS antenna installation
guidelines.
5.
FT-9000 RAMP Tester
A.
General
(1)
For KGX series installation checkout, troubleshooting, and system operation verification, as
necessary, it is recommended to use the FFS FT-9000 ramp tester.
EFFECTIVITY
ALL
Page 1004
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.