SYSTEM INSTALLATION MANUAL
89000016
Figure 3069. (Sheet 1 of 1) Antenna Distance From Nose Display
Figure 3070. (Sheet 1 of 1) Antenna Lateral Offset Display
(22) Mode A/C Receiver Sets Squawk
(a)
This mode has two options:
• Enable
• Disable.
(b)
Set to “enable” when configuring for use with a transponder that does not have digital
control output. This allows the internal or external transponder monitor sniffer antenna
to detect the squawk code being broadcast from the airplane and use this same one
in the ADS-B Out messages.
(c)
Set to “disable” when using a transponder with digital control output.
(d)
The display screen is as shown in Figure 3071 with one of the options from above.
(e)
Rotate the CODE knob either clockwise or counterclockwise to display the options
above and select either enable or disable. Once selected, press the ENT key to confirm
selection and move to the next configuration item in the configuration mode.
Figure 3071. (Sheet 1 of 1) Mode A/C Receiver Sets Squawk Display
(23) 1090 MHz Receiver Installed
(a)
The display screen is as shown in Figure 3072 with either YES or NO options.
(b)
Rotate the CODE knob either clockwise or counterclockwise to display either YES or NO
and select the correct option. Once selected, press the ENT key to confirm selection and
move to the next configuration item in the configuration mode.
Figure 3072. (Sheet 1 of 1) 1090 MHz Receiver Installed Display
EFFECTIVITY
ALL
Page 3054
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.