SYSTEM INSTALLATION MANUAL
89000016
Figure 3. (Sheet 1 of 1) KGX 150/130 Transceivers and Receivers
C.
KGX Control Panel (Optional)
(1)
Installations where the transponder and/or display can’t give the required control and status,
the KGX control panel can optionally be used to control the UAT transmitter and display status.
The KGX control panel also contains a TSO-C88b and ETSO-C88a certified pressure altitude
encoder and RS-232 serial output to share altitude sensor data with a transponder. The KGX
control panel also displays the pressure altitude received directly by the KGX 150T/130T
transceivers and outputs the altitude on its RS-232 serial output.
(2)
The KGX control panel has a DB-9 connector for electrical interface and a static pressure port.
The KGX control panel contains:
• An LCD display with controls
• A built-in altitude encoder
• A low-voltage input power interface
• A KGX 150/130 transceivers serial interface
• A remote on/off power control
• A serial altitude output.
(3)
The KGX control panel is not required if the KGX 150T/130T transceiver is connected to a
transmit controller (transponder) and/or display that can supply, as a minimum:
• Mode A code entry and display
EFFECTIVITY
ALL
Page 5
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.