SYSTEM INSTALLATION MANUAL
89000016
ADS-B COMPLIANCE
1.
General
A.
ADS-B Parameters Supported
(1)
Table 7001 lists the supported ADS-B parameters.
Table 7001. Supported ADS-B Parameters
No.
Input Data Element
Comments
(Use Within KGX)
1
ICAO 24-bit address
Installation configuration
2
Address selection (ICAO vs temporary)
Anonymous discrete input
3
Latitude
From GPS data
4
Longitude
From GPS data
5
Altitude type selection (barometric vs
geometric)
Baro unless invalid or inhibited
6
Barometric pressure altitude
From altitude/air data sensor
7
Geometric altitude
From GPS data
8
NIC
From GPS data
9
Automatic airborne/on-ground indication
Air/ground discrete input
10
North velocity
From GPS data
11
East velocity
From GPS data
12
Ground speed
From GPS data
13
Track angle
From GPS data
14
Heading
From configured heading input
15
Barometric vertical rate
From altitude/air data sensor
16
Geometric vertical rate
From GPS data
17
A/V length and width, and POA
Installation configuration
18
UTC 1 PPS timing
From GPS Data
19
Emitter category
Installation configuration
20
Call sign
From controller interface
21
Emergency/priority status selection
From controller interface
22
SIL
GPS with HIL or HPL only
23
System design assurance (SDA)
Installation configuration
24
SIL supplement
GPS with HIL or HPL only
25
NACp
From GPS data
26
NACv
From GPS data
EFFECTIVITY
ALL
Page 7001
22 Dec 2016
© Honeywell International Inc. Do not copy without express permission of Honeywell.