Belarus 80.1 Series Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 381

Belarus 80.1 Series Скачать руководство пользователя страница 68

80-0000010B OM

68

2.23 Fuel tank valves control

1, 7 – valve; 2, 6 – drain fitting; 3, 4 – tank; 5 – line of fuel supply into the engine; 8

– fuel line, connecting fuel tanks.

Figure 2.23.1 – Fuel tank valves control

Fuel intake into the engine can be carried out from tank 3 (figure 2.23.10) or from

tank 4 or from the two tanks simultaneously.

When the engine is running fuel intake is done in the following way:

-

if valve 1 is closed, and valve 7 is open, the fuel is supplied into the engine from

tank 4;

-

if valve 7 is closed, and valve 1 is open, fuel is supplied into the engine from

tank 3;

-

if both valves are open, fuel is supplied into the engine from two tanks simulta-

neously;

-

if both valves are closed, fuel is not supplied into the engine.

If one of the valves or both valves are closed when the engine is not running, fuel
leveling does not occur.
The closed position of valve handles 1 and 7 is shown in figure 2.23.1. to open
the valve, it is necessary to turn the valve handle to the left (counterclockwise), 90

0

.

«
...
66
67
68
69
70
...
»

Содержание 80.1 Series






























































































































































































































































































































































































Отзывы:

Нет отзывов