Belarus 80.1 Series Скачать руководство пользователя страница 270

Страница: 270 / 381

80-0000010B OM

270

IT IS FORBIDDEN TO OPERATE THE LOADER ON A TRACTOR WITHOUT A CAB

OR A CANOPY FRAME; WITHOUT NOT-WILLED MOVEMENT LIMITING SYSTEM (SEAT

BELTS), AS WELL AS IN CONFIGURATION WITH FRONT AND REAR TYRES OF ANY

OTHER CONFIGURATION THAN THE BASIC ONE.

To install a loading equipment kit, use the holes of the front beam, side rail and

coupling clutch housing of the tractor. For the purpose of unloading the semi-frame and

the coupling clutch case, it is required to use adjustable bars or other constructive ele-

ments connected to rear semi-axles’ tubes of the rear axle, which transfer a part of push

force to the tractor rear axle. For rigidity, it is desirable that the right and left parts of the

loader mounting frame are rigidly connected with each other.

Loader installation scheme is shown in figure 5.10.1.

1 – loading equipment kit for the tractor; 2 – cross-linkage of loader frame;

3 – push rod; 4 – loader bucket; 5 – rear ballast weight.

Figure 5.10.1 – Loader installation scheme

To provide sufficient traction force generated by tractor rear wheels, it is necessary

to create sufficient load on the rear axle, which shall make not less than 60 % of tractor

operational weight considering the installed loader weight.

The right proportion of loads on tractor axles can be achieved by ballasting the rear

axle with weights, solution filled into tyres, rear counterweight (hook-on bucket with ballast

load) attached to rear lift linkage.

ATTENTION: IN THE LOADER OPERATION MANUAL DESIGNED FOR CON-

SUMERS, LOADER MOUNTING ORDER SHALL BE SPECIFIED WITH ILLUSTRATIONS

INCLUDING INFORMATION ON SHIFTING AND DISMOUNTING OF TRACTOR ELE-

MENTS.

The loader design shall provide safety and locking devices (fast coupling clutches,

retarder valves, overload limiters and others) that preclude conflicting motion of mecha-

nisms,

overloads and breakages in operation when there is excess of permissible pressure

values in the hydraulic system, of rated load capacity or traction force.

In the mode of ground cutting, it is necessary to provide protection of tractor and

loader chassis from overload. Overturning of loader operating part (bucket etc.) can hap-

pen due to actuation of a special valve integrated in the loader system.

Содержание 80.1 Series






























































































































































































































































































































































































Результаты поиска

Содержание 80.1 Series

Отзывы:

Belarus 80.1 Series, Руководство по эксплуатации, Страница: 270 / 381

Результаты поиска

Содержание 80.1 Series

Отзывы: