Belarus 80.1 Series Скачать руководство пользователя страница 287

Страница: 287 / 381

80-0000010B OM

287

1 – water radiator; 2 – clamp fastening the expansion tank; 3 – expansion tank; 4 – plug

of expansion tank; 5 – steam-outlet and expansion pipe; 6 – water radiator plug; 7 – pipe

branch from water radiator to water pump of the engine; 8 – drain valve; 9 – pipe branch from

engine water pump to water radiator.

Figure 6.4.2 – Check of coolant level in the engine cooling system

WARNING: ENGINE COOLING SYSTEM WORKS UNDER PRESSURE WHICH IS

MAINTAINED BY A VALVE IN RADIATOR PLUG. IT IS DANGEROUS TO REMOVE THE

PLUG WHEN THE ENGINE IS HOT. LET THE ENGINE COOL DOWN, COVER THE PLUG

WITH THICK CLOTH AND TURN IT SLOWLY TO REDUCE PRESSURE IN A SMOOTH

MANNER BEFORE REMOVING THE PLUG COMPLETELY. AVOID BURNS BY HOT FLUID!

6.4.1.4 Operation 3. Check of oil level in the combined HLL and HSC tank

Note – The operation shall be performed on tractors with universal cabin (canopy frame

or a canopy base based on universal cabin).

On tractors with HSC, tank 3 (Figure 6.4.3) is a combined tank for HLL and HSC, and

on tractors with HPS, tank 3 is only the tank for HLL.

Before checking oil level, put tractor on a flat horizontal platform. Lift the RLL links to

their top position, stop the engine and brake the tractor with the parking brake.

Check oil level visually by means of oil level indicator 1 (Figure 6.4.3) on tank 3 on trac-

tor left side. The level shall be between marks “O” (O) and “П” (P) of the indicator. If required,

remove threaded plug 2 and top up oil to the level of mark “П” through oil filler opening.

Содержание 80.1 Series






























































































































































































































































































































































































Результаты поиска

Содержание 80.1 Series

Отзывы:

Belarus 80.1 Series, Руководство по эксплуатации, Страница: 287 / 381

Результаты поиска

Содержание 80.1 Series

Отзывы: