Baker Hughes Panametrics PanaFlow LC, Руководство пользователя

Страница: 35 / 146

3.3.1d Totalizer display
The Totalizer display on the Measurement View shows the totalized measurements and provides the ability to start, stop
and reset totals. Refer to Figure 49 to set Display format to Totalizer. Do the following steps to select the appropriate Totalizer
measurements to view on the Measurement View. Refer to Figure 52.
1. Press [

] button on the keypad until the Measurement name on the meter’s Measurement View display is highlighted,
and press [ENTER].
2. In the Display/Totalizer, select [Composite] or [Channel x], then press [ENTER].
3. Then, select the totalizer measurement you would like to see on the Measurement View and press [ENTER].
4. Press [

] button on the keypad until the [ | | or

] is highlighted to stop or start the totalizing respectively.
5. Press [

] button on the keypad until the [
P
] is highlighted to reset/clear the totalized measurements.
m^3
0.000
0.000
Rev Vol Total
m^3
Totalizer
Channel 1
Channel 2
Channel 3
Composite
Fwd Vol Total
or
Totalizer/Composite
Rev Vol Batch
Net Vol Batch
Batch Time
Fwd Vol Batch
Totalizer/Channel 1
Rev Vol Batch
Net Vol Batch
Batch Time
Fwd Vol Batch
Totalizer/Channel 1
Channel 2
Totalizer
Channel 3
Composite
or
m^3
Fwd Vol Total
0.000
0.000
Rev Vol Total
m^3
Totalizer/Composite
Fwd Mass Totals
Rev Mass Totals
Batch Totals Time
Channel 1
Net Mass Totals
Fwd Mass Batch
Rev Mass Batch
Batch Time
Net Mass Batch
(or)
Totalizer/Composite
Fwd Std Vol Batch
Rev Std Vol Batch
Net Mass Batch
Net Std Vol Batch
Totalizer/Channel 1
Fwd Std Vol Batch
Rev Std Vol Batch
Net Mass Batch
Net Std Vol Batch
Figure 52: Selecting totalizer measurements for display
23