Baker Hughes Panametrics PanaFlow LC, Руководство пользователя

Страница: 33 / 146

3.3.1a Changing display format
To change Display Format, do the following steps and refer Figure 49.
1. Press [

] until the lock icon on the meter’s Measurement View display is highlighted, and press [ENTER].
2. In the Main Menu select [Display Format], then press [ENTER].
3. Select [One Variable] or [Two Variable] or [Totalizer] format to suit your needs.
0.000
Velocity
m/s
Main Menu
Program
Flow Info
Errors/Warnings
Display Format
0.000
Velocity
m/s
Velocity
m/s
m^3
Fwd Vol Total
Display Format
One Variable
Two Variable
Totalizer
Display Format
One Variable
Totalizer
Two Variable
Display Format
One Variable
Two Variable
Totalizer
m/s
0.000
0.000
Ch1 Velocity
0.000
Rev Vol Total
0.000
m^3
Figure 49: Changing display format
3.3.1b Selecting a composite measurement to display
To select a composite measurement to display on the Measurement View, do the following steps and refer Figure 50.
1. Press [

] until the Measurement name on the meter’s Measurement View display is highlighted, and press [ENTER].
2. In the Display Measurement select [Composite], then press [ENTER].
3. Then, select the measurement you would like to see on the Measurement View and press [ENTER].
0.000
m/s
Channel 1
Channel 2
Display Measurement
Channel 3
Composite
Inv Vol Measure
Composite
Velocity
Volumetric (Act)
Composite
Volumetric (Std)
Raw Velocity
Velocity
m/s
m/s
0.000
0.000
Velocity
Mass
Avg Vol Flow Rate
Batch Vol Total
Composite
Inventory Vol Total
Batch Mass Total
Soundspeed
Inventory MassTotal
Std Dev of SoS
Composite
Reynolds #
Composite
K-Factor
Reynolds K-Factor
Reynolds #
On Board Temperature
Diagnostics
On Board Temperature
Inputs
Composite
Reynolds #
On Board Temperature
Inputs
Diagnostics
Fwd Vol Inventory
Rev Vol Inventory
Net Vol Inventory
Inventory Time
or
Fluid Temperature
Pressure
Diagnostic
Cycle Time
or
Inputs
or
(or)
Velocity
or
Figure 50: Selecting a composite measurement to display
21