Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 84 / 282

3 Configuring the Software
84
AirSpeed Multi Stream Configuration Checklist
The following table provides a checklist of tasks that must be performed when configuring
your AirSpeed Multi Stream. Depending on your site’s configuration, some tasks are
optional.
‰
Configure the Avid Framework Workstation, as described in “Configuring the Avid
Framework Workstation Workgroup” on page 85 .
‰
(Option) If you are using Avid iNEWS Command or CaptureManager to control
AirSpeed Multi Stream, you need to install the AirSpeed Multi Stream Device Service
(for Command and CaptureManager), as described in
“(Option) Installing the AirSpeed
Multi Stream Device Service” on page 86 .
‰
Create a new database in the AirSpeed Multi Stream application, as described in
“Creating a New Database in the AirSpeed Multi Stream Application” on page 87 .
‰
Set your new database as the default database, as described in “Setting the Default
Database” on page 90 .
‰
Configure Channels on AirSpeed Multi Stream, as described in “Configuring Channels
on AirSpeed Multi Stream” on page 91 .
‰
Configure the Avid Service Configuration for Interplay Workgroup, as described in
“Configuring the Avid Service Configuration for Interplay Workgroup” on page 97 .
‰
Launch Transfer Manager, as described in “Launching Transfer Manager” on page 105 .
‰
(Option) If you are using Avid iNEWS Command or CaptureManager to control
AirSpeed Multi Stream, you must configure AirSpeed Multi Stream Channels for Remote
Control with Avid iNEWS Command or CaptureManager, as described in
“Configuring
Channels for Remote Control with Avid iNEWS Command or CaptureManager” on page
106
.
‰
(Option) Configure Communication Protocols in AirSpeed Multi Stream, assuming you
have external devices that will control AirSpeed Multi Stream (such as automation
systems), as described in
“Configuring Communication Protocols in AirSpeed Multi
Stream” on page 111 .
‰
(Option) Configure General Purpose Interface (GPI) Inputs and Outputs in AirSpeed
Multi Stream, as described in
“Configuring General Purpose Interface (GPI) Inputs and
Outputs” on page 113 .
‰
Configure your Avid Editor to work with AirSpeed Multi Stream, as described in
“Locking Channel Assignments” on page 119 .